The robotics society hosts several courses to help beginners get the basic knowledge required to start taking part in our projects. Please see specifics about each course below to see how to join and when they are running. If you are unable to get on a course then please feel free to view our Tutorials.
ARM Robotics 101
This year, in the Autumn term, we will be holding a robotics course which aims to bring beginners up to speed with fun and competitive robotics. Each participant will have an exciting opportunity to learn about robotics, become familiar with all the common components and technologies involved.
- More information can be found on the Robotics 101 page.
- For enquiry please contact our course supervisor Thomas Clayson.
We start with logic gates and flip flops and by the end of the course you should (hopefully) have made your own CPU. We will implement this using Hardware Description Language and synthesize our hardware designs for FPGA chips. That is, you will design a fully functional CPU from the ground up, which you can actually hold in your hand!
This course will be completely free, however you will need to bring your own laptop to each session. The course will be in the EEE building on thursdays in room 403A from 18:00 to 21:00 starting on the 31th of January.
To sign up for this course, just sign up here: <link comming soon>
This is going to be quite a fast paced course, therefore we recommend the following prerequisite knowledge:
- Basic Logic gates and basic boolean algebra
- 2’s complement binary
If you are excited about this curriculum but aren't fully comfortable with the above topics, wikipedia should be sufficient to bring you up to speed. Either way, feel free to show up to the first couple of lectures to see how it goes.
C++ for Beginners
Our very first cross-society cooperation course with the Software Soc.! This course aims to introduce programming though the language of C++ to beginners.
- More information can be found on the C++ for Beginners page.
- For enquiry please contact Thomas B..
- Please remember to buy Software Soc.'s free membership.
Introduction to Android
The course aims to post short lessons online, teaching the essentials of developing for your own android device, and instruction on how to make apps that can use onboard hardware such as accelerometers and GPS, and interface with an mbed microcontroller for larger projects.
Our pilot primarily-wiki-based course enables you to learn anytime at your leisure from lessons posted on the wiki and drop by our ICRS labs if you get stuck. Stuck already? Just not drop by us, and we will help.
- Access the lessons here:
- For enquiry please contact George.
Crash course in CAD
Introducing knowledge previously reserved for the mechanically inclined, now YOU can become a CAD expert in no time!
- Ahem* This course aims to introduce Computer Aided Design (CAD) to beginners across departments.
- More information can be found on the CAD course page.
- For enquiry please contact Christian C.
Below is the information for courses we have run previously, which we aim to revive as soon as our capacity problems are sorted out.
Please note that the information displayed may be outdated.
During the autumn term, ICRS will be hosting a PCB design course. The aims of this course are to teach people who are interested in circuit board design how to create a fairly complex PCB and allow them to test it in a "surprise" project.
- More information can be found on the PCB 101 page
- For enquiry please contact the course supervisor Alex Toea
Introduction to Arduino
Microcontrollers are everywhere. You're probably carrying more than one microcontroller on you right now. This workshop aims to get people familiar and confident with using these handy little devices. Centered around the infamous Arduino development boards, each workshop session hopes to explore different aspects of how to use microcontrollers and design with them.
- More information can be found on the Introduction to Arduino page
- For enquiries, please conteact our course supervisor Shane Fleming
Android OS programming 101
As mobile computing is becoming more and more of the norm than exception and with the rise of open-source, there is no better time to learn how to programm with the Android SDK to harness the power of your Android smartphones and tablets. What's more? In this course, you'll be taught how to interface your apps with electronics and hardware using the ROS operating systems for electronics & robotics applications.
- More information can be found on the Android OS programming 101 for robotic interface page
- For enquiries, please conteact our course supervisor Tuan Le Mau
Organizing a Course
If you want to organize a course or a lecture, have a look at Organising An Event.